Analogue for Dowsil 52 Additive with Good compatibility Silicone Dispersion.

Product Name: Silicone Dispersion

Item No.: SilibaseSDP-5745

Ultra-high molecular weight silicone dispersion

64% solids in water

APEO-free

Chinese factory produce Good Compatibility Silicone Dispersion Similar as Dowsil 52 Additive. SilibaseSDP-5745 Additive is a silanol functional, ultra-high molecular weight silicone dispersion in water (64% solids content).

Replacement product for Dowsil 52 Silicone Dispersion.SilibaseSDP-5745 is an ultra-high molecular weight silicone emulsion that has good compatibility with water-based acrylic, polyurethane, alkyd, polyester, epoxy, and vinyl resin systems. The product provides excellent slip, anti-adhesion and wear resistance, and has excellent transparency and low foaming properties. It provides a soft and smooth touch in water-based wood coatings and leather coatings, and does not contain aromatic solvents and organotin, and is safe and environmentally friendly.

Silibase Silicone produce an ultra-high molecular weight silicone emulsion Substitute for Dowsil 52 Additive.

Flowable liquid for processing ease

Good compatibility with waterborne acrylic, alkyd, polyester, epoxy, PU and vinyl resin based coatings

Imparts very low Coefficient of Friction

Effective at very low addition levels

Does not influence surface hardness

No negative impact on water resistance

Novel surfactant technology to deliver high molecular weight PDMS into waterborne systems

Easy to incorporate/disperse – can be added during let-down or post-addition

Good compatibility in multiple coatings formulations

Good slip, abrasion resistance, scratch resistance and anti-blocking

Recoatable

Good cost-in-use performance

No impact on mechanical properties

Suitable for use in exterior coatings

Please contact your local customer center to receive the EU Food Profile

Performance comparable to Dowsil 52 Additive with low viscosity.

Leather coatings

Wood coatings

Floor coatings

Printing inks

Inks and overprint varnishes

Interior and exterior paints

Direct addition, calculated based on total formula: 0.1-5.0%

Can be diluted with water in any ratio

Chinese factory supplies good compatibility additives Substitution Dowsil 52 Additive.

The low viscosity of SilibaseSDP-5745 Additive facilitates the easy incorporation into waterborne formulations, allowing it to be added during the let-down or to be post-added.

SilibaseSDP-5745 Additive is effective at low concentrations. It is used at typical concentrations of 0.01–3.5% as supplied in waterborne systems, based on total formulation. Pre-dilution with water can be made if required. The amount to use will vary depending on the coating formulation and should be checked before industrial use.

SilibaseSDP-5745 Additive is compatible with acrylic, alkyd, epoxy, polyesters, polyurethane

and vinyl based resin systems.

Packing Specifications:25/200/1000kg plastic barrel